Barker

Grant's Co2 car
WELCOME!

Hi my name is Grant. This page is dedicated to the cause of technology.

This is my Co2 car from the power point of view.

This is my Co2 car for you to see!

!CauTioN! While at this time if you are not educated on Co2 cars this page is not to inform you about them but to inform you of : Why, What, How.

Hey if your here you have searched through alot of other webpages of much less quality. So now that you've arrived read, enjoy and learn!

We made these cars for a class project in Technology. The reason for making these Co2 cars is to make the designing part of the course complete, and because our teacher wanted us to. So we followed his request and unknowingly entered in to a process of engineering and a whole lot of fun!!! These cars are quite gnarly!

How you make one of these awesome cars:

1. Get a piece of wood from your teacher, hobbie shop or cut it yourself.

2. Draw a drawing on graph paper a side and top view.

3. Place your drawing on the wood with a magic marker.

4. Cut your peice of wood with a band saw or somthing to that effect.

5. You must now sand, start with course sand paper and work you way to finer paper.

6. Make sure that your car is totally smooth and exactly the way you want it to look!

7. Once this is done you should put some water on your hands then rub it on you car.

8. Then paint some primer on it (2 or 3 coats) then sand it smooth.

9. Then begin to paint with the color of paint you would like to paint your car.

10. Paint a coat and then sand it down then paint (depending on the paint) 2 or 3 coats.

11. Buy or recieve a Co2 cartrige from your teacher stick it in the back of your car.

12. Set up the track and have fun!!!

................................................

This was a very fun project you should try to make one of these little hummers!!!

Thank you Mr. Johnson for the opportunity to do these webpages! I would like to inform the general audience that NO PIXELS were harmed in the production of this webpage!!! I would like to thank;

1. Toto for helping Dorothy.

2. Dorothy for going somwhere over the rainbow.

3. My mother for bringing me into this world.

4. The Tinman for his dashing quest for a heart with a twist of oil in the way.

5. My Father for helping my mother

6. The wizard for...

7. Brandon for no other reason than no other person would acknowledge him.

8. And the Human Race in general.


This is my Co2 car from the power point of view.	This is my Co2 car for you to see!

1. Get a piece of wood from your teacher, hobbie shop or cut it yourself.	2. Draw a drawing on graph paper a side and top view.	3. Place your drawing on the wood with a magic marker.
4. Cut your peice of wood with a band saw or somthing to that effect.	5. You must now sand, start with course sand paper and work you way to finer paper.	6. Make sure that your car is totally smooth and exactly the way you want it to look!
7. Once this is done you should put some water on your hands then rub it on you car.	8. Then paint some primer on it (2 or 3 coats) then sand it smooth.	9. Then begin to paint with the color of paint you would like to paint your car.
10. Paint a coat and then sand it down then paint (depending on the paint) 2 or 3 coats.	11. Buy or recieve a Co2 cartrige from your teacher stick it in the back of your car.	12. Set up the track and have fun!!! ................................................