The steps of making our cars!!!!

1. First we had to figure out what we wanted to have our cars look like. I chose to have a dragster type. It's blue with spackle. We have to draw it out and tape the design to a block of wood.

2. Then we used a band saw and cut out the side first, after that we cut the top. then, we had to sand the crud out of it.

3. Then we wet our car a few times to get the dirt out and so the paint won't bubble. Then we sanded some more.

4. After sanding we put on a white coat on and we sanded it some more until the paint is almost off.

5. Finally we put on the first coat of paint. I chose blue.

6. It dried, then we sanded some more and put the next coat on. At this time it was my last coat. For decoration I spackled it with white.

7. And that's it really. This project took about 4 weeks to get done.